New PEHAMED Densonorm 21E

NEW X-RAY SENSITOMETER AND SCANNING DENSITOMETER-DENSONORM 21-(40470) FILM PROCESSOR

These are new units for processor quality control.

The Densonorm 21 i is a compact combination of asensitometer and a densitometer with automatic scanner for quality control ofx-ray film processing and checking of test phantom films. The accuracy and easy handling of this unitmake the Densonorm 21 i an indispensable tool for radiologists, hospitals,physicists and service personnel.

Features:

* Sensitometer/densitometer/automatic densitometer - three parts in one compact unit.

* Microprocessor controlled

* Automatic feeder/scanner system

* Long measure arm middle of film measurements up to filmsize 14 x17 cm possible

* Dimensions 9.5"x3.5"x7.5"

* Weight 3.3 lbs

* Power supply 9.5 volts or optional power adapter

Sensitometer features:

* 21 Density steps with increase D 0.15 from step to step

* Green color peak wavelength 510 nm

* Blue color peak wavelength 460 nm

* Evenness exposure of one step is less than D 0.01

* Repeatability is better than +/- 0.02 log e

* Time stability is better than +/- 0.02 log e

* No exposure at low battery voltage

* Light output for green and blue with separate adjustment

* Mark on film for green and blue exposure

Features for Automatic DensitometeR:

* Reads 21 step density levels in less than 5 seconds

* Automatic Zero Calibration

* Calibration through delivered calibration film (use seldomnecessary_

* No warm-up time

* Information displayed via LCD

* Immediate evaluation of sensitometric strip via LCD ofthese statistics

- Speed Index +contrast Index

- Base and Fog

- D step 21

- LE (Light Speed)+ LK (Light Constrast)

- Relative Speed +Average Gradient

-Presentation of21 density steps

- Adjustable todifferent languages

* RS232 interface

* Measuring rang is D 0.00 - 4.50

* Measuring accuracy is +/- 0.01

* Temperature operating range is 59F to 95F (15C to 35C)

* Measure point is 3mm diameter

* Measuring and calculation time about 10 seconds

* Stability is +/- 0.01

Features of Point Densitometer:

* Immediate on

* Density point measurements with measure arm.

* Length of measure arm is 8" (20cm)

* Measure results on LCD display

* Calibration possible with included calibration film

* Own light source

* Measuring rang is D 0.00 - 4.50

* Measuring accuracy is +/- 0.01

* Temperature operating range is 59F to 95F (15C to 35C)

* Measure point is 3mm diameter

* Stability is +/- 0.01

New units have a 1 year warranty.

Availability: Typically we can ship within 5 days, however, if we are out of stock, it may take 10 days before shipping.