Used AGILENT G1316C 1290 Series

The Agilent 1290 Infinity Thermostatted Column Compartment is a stackable temperature-controlled column compartment for LC. It is available as a standalone module or as a component of an Agilent 1290 Infinity system. It is used for heating and cooling to meet extreme requirements of retention time reproducibility.

Specifications:

Physical Specifications;

Weight: 11.2 kg (22 lbs)
Dimensions (height × width × depth): 140 x 345 x 435 mm (5.5 x 13.5 x 17 inches)
Line voltage: 100 – 240 VAC, ± 10 %
Line frequency: 50 or 60 Hz, ± 5 %
Power consumption: 320 VA / 150W / 512 BTU
Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)
Humidity: < 95 % r.h. at 40 °C (104 °F)
Operating altitude: Up to 2000 m (6562 ft)
Non-operating altitude: Up to 4600 m (15091 ft)

Performance Specifications;

Temperature Range: 10 degrees below ambient to 100°C
Temperature stability: ± 0.05°C
Temperature accuracy: ± 0.8°C, ± 0.5°C
Column capacity: Three 30 cm
Warm-up/cool-down time: 5 min from ambient to 40°C, 10 min from 40-20°C
Communications: Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN via other modules.
Dead Volume:
1.6 µl low dispersion heat exchanger
3 µl left heat exchanger
6 µl right heat exchanger