For Sale Bio-Rad QX600 AutoDG Droplet Digital PCR System w/ Plate Sealer & PTC Tempo Thermal Cycler

Internal part number SM101638-PTC

• Fully Functional
• Serviced & in Stock
• Good cosmetic condition
• Technical sales consultation available
• 60 DAYS INTERNATIONAL WARRANTY
• Includes remote instrument setup and training session 

Here is what you will receive:

• Bio-Rad QX600 Droplet Reader
• Bio-Rad AutoDG Automated Droplet Generator
• PX1 Plate Sealer
• PTC Tempo Deepwell Thermal Cycler
• Computer with Bio-Rad software
• Communication and power cables

QX600 AutoDG Droplet Digital PCR System Configuration:

Automated Droplet Generator: (does not include cooling block)

• Starting sample size: 20 ul
• Capacity: 1-96 samples/run
• Droplets per sample: 20,000

QX600 Droplet Reader:

• Quantification of 12 targets in a single well
• Absolute quantification with 0.1% or better sensitivity
• Capacity: 1-96 samples/run
• Sample illumination: light-emitting diodes
• Sample detection: avalanche photodiodes
• 6 Detection channels: FAM (EvaGreen), HEX (VIC), Cy5, Cy5.5, ROX, and ATTO 590

PTC Tempo Deepwell Thermal Cycler:

• Lid type: automated
• Block formats: higher volume: deepwell (0.2 and 0.5 ml)
• Sample capacity: 96 x 0.2 ml tubes, 48 x 0.5 ml tubes, or 1 x 96-well plate
• Sample volume: 1-125 ul (10-125 ul recommended)
• Maximum ramp rate: 2.5DegC/sec
• Average ramp rate: 2DegC/sec
• Temperature range: 4-100DegC
• Gradient:
• - Operational range: 30-100DegC
• - Programmable span: 8 rows, 1-24DegC

PX1 PCR Plate Sealer:

• Heat up time: <3 min
• Temperature range: 100-190 DegC
• Time range: 0.5-10s

Customization/Options: N/A

Testing performed by our in-house service team:

The QX600 AutoDG Droplet Digital PCR System passed all tests and was found to be fully functional:

• We test the power of the QX600 AutoDG ddPCR System.
• We establish communication with the system’s software.
• We prepare the test sample using the AutoDG module.
• We assess the sample cover's functionality.
• We verify accurate sample detection.
• We check the fluid and waste level sensors.
• We examine the fluid and waste door sensors.
• We check the system using the software control interface.
• We perform a thorough system flush.
• We prime the system before operation.
• We test the QX200 with test fluid to verify detector and fluidics performance.
• We evaluate the thermal cycler across its full temperature range for consistency.
• We seal the plate using the PX1 Plate Sealer.

Instrument Overview:

• The Bio-Rad QX600 AutoDG Droplet Digital PCR System with Plate Sealer & PTC Tempo Cycler offers automated droplet generation.
• This instrument streamlines plate sealing and thermal cycling for consistent digital PCR workflows.
• The system provides high droplet uniformity, improving quantification accuracy across samples.
• Bio-Rad QX600 AutoDG Droplet Digital PCR System supports high-throughput processing with minimal hands-on time.
• Integrated automation reduces variability and enhances reproducibility in demanding lab environments.
• The Bio-Rad QX600 AutoDG Droplet Digital PCR System with PTC Tempo Cycler enables reliable nucleic acid quantification.

Instrument Application:

• Absolute quantification of target DNA or RNA
• Detection of rare mutations or low-abundance variants
• Copy number variation (CNV) analysis
• High-precision viral load quantification

The Key Features:

• Automated droplet generation
• High-sensitivity digital PCR
• Rapid plate sealing workflow
• Consistent deepwell cycling
• Streamlined sample handling
• Reliable quantification results

WHY DO CUSTOMERS MAKING CRITICAL LAB PURCHASES CHOOSE TO ORDER DROPLET DIGITAL PCR FROM US?

They want assurance that droplet generation is validated using the AutoDG module with a controlled test sample, ensuring the system produces stable, uniform droplets within acceptable droplet-count tolerances.

They want to ensure the cytometer has no residual oil clogging in the flow cell, which could skew scatter data and, if improperly cleaned, can damage the flow cell.

They want to confirm that the droplet generator has had all channels cleaned and tested to ensure there are no clogs common to long periods of inactivity.

They want assurance that baseline performance has been verified using standardized particles, with data or log files available for review.

They want to confirm that electronic noise and EMI levels at the detector/amplifier stage remain within tolerance and will not distort signal fidelity.

They want to ensure the fluidics pump assembly does not exhibit pulsation, drift, or backpressure due to check valve wear or micro-leaks.

They want peace of mind, knowing their instrument is backed by a warranty from a company that can stand behind it.

Our Advantage

• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping.  see the questions section below  
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies. 
• Technical sales consultation available
• Remote installation and instrument operation training may be available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee

• Warranty
• You get after-sales technical support
• Customer references are available
• The instrument will be fully functional!
• Smooth process from the initial quote to order fulfillment

This will ship via freight. Please contact us with your zip code to obtain a shipping quote.

SM Small Crate
200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper.  If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.  

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries. 

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.